Skip to Content

Technical Specifications

Plate

SRH

SRM

SRC

SRC-K

Plate thickness 1.14 mm
1.70 mm
2.28 mm
2.54 mm
2.84 mm
1.14 mm
1.70 mm
2.54 mm
2.84 mm
2.84 mm
3.94 mm
3.94 mm
4.70 mm
5.00 mm
6.00 mm
6.35 mm
7.00 mm
7.50 mm
Relief depth 0.5-0.7 mm
0.6-1.0 mm
0.7-1.5 mm
0.7-1.5 mm
0.5-0.7 mm
0.7-1.5 mm
0.7-1.5 mm
0.7-1.5 mm
1.4 mm
1.9 mm
1.9 mm
2.2 mm
2.3 mm
2.5 mm
2.5 mm
2.7 mm
2.7 mm
Durometer Shore A 1.14 mm: 70 - 76
1.70 mm: 61 - 67
2.54 mm: 57 - 63
2.84 mm: 56 - 62
1.14 mm: 67 - 73
1.70 mm: 57 - 63
2.54 mm: 51 - 57
2.84 mm: 50 - 56
3.18 mm: 50 - 56
2.84 mm: 37 - 42
3.94 mm: 32 - 37
3.94 mm: 32 - 38
4.70 mm: 34 - 40
5.00 mm: 34 - 40
6.00 mm: 33 - 39
6.35 mm: 33 - 39
7.00 mm: 32 - 38
7.50 mm: 32 - 38
Resolution 1 to 95% @ 150 lpi 1 to 95% @ 150 lpi 3 to 95% @ 133 lpi 3 to 95% @ 133 lpi
Isolated dot reproduction 100 – 130 μm 100 – 130 μm 150 – 200 μm 150 – 200 μm
Fine line reproduction 70 – 100 μm 70 – 100 μm 100 μm 100 μm
Wash-out solution Compatible with most wash-out solutions. Refer to manufacturer’s recommendations.
Dryer temperature 51o - 55oC / 123.8o - 132o F
Final dry times will vary depending on the plate caliper, processing equipment and type of washout solution used.
Ink compatibility Aqueous, solvent-based, UV-cured and cationic inks.
Storage and handling Unopened plate packs should be stored flat and away from excessive cold, heat and humidity. Use in a controlled environment of 10o – 25oC (50o – 77oF) and 40 – 55% RH.